CNC Fibre Laser Ultra Hard Material Cutter With Competitive Price
ZT-JGQG6S is a new model of laser cutting machine. The self-developed laser source makes better cutting
performance, completely replaced the traditional YAG cutting machine. Higher cutting speed and thinner
cutting kerf (2.0mm thickness PCD, the cutting kerf is 0.06-0.08mm), smooth cutting surface, running
steady and maintenance-free. Suitable for cutting PCD/PCBN/CVD/Sapphire/PDC/Cemented Carbide/
Ceramics and other precious and ultra-hard materials. Especially, it has incomparable advantages in cutting
low content PCBN.
Design Features:
• Marble base table, not affected by temperature and humidity, stable and not easy to deform.
• Adopts advanced fiber laser module, more stable, more precise, more durable and
maintenance-free.
• The self-developed laser source, minimum after-sales service cost.
• High efficiency, high precision cutting, thin cutting kerf, saves the material.
• 3 times faster cutting speed than YAG, with smaller heat-affected zone.
• Two axis of the worktable are driven by servo motor, closed-loop control, repositioning accuracy :s:0.005mm.
• 24 hours working, processing any 2D graphics, software supports automatic model and manual model, equipped with CCD monitor.
• Z axis step motor drive and A axis as rotary axis, can process the material with relief angle.
Technical Parameters:
| Power supply requirements | 380V50Hz, Five-core four-square power cord |
| Working environment | Room temperature 20~40℃, humidity ≦60%, away from oil source |
| Cooling Mode of Machine | Adopt dual temperature cooling system , laser cutting head cooled by room temperature water. Laser cooled by 22℃cooling circulating water, and for manufacturing workpiece cooled by purify oil-free compressed air. |
| Laser Source | Fiber laser |
| Duty Ratio | 1~100% |
| Frequency | 1-2000 Hz |
| Power percentage | 1%~100% |
| Four Axis stroke | 300*300*50mm A-Axis 0±30° |
| Maximun power output | 3000W |
| Positioning accuracy | ≦± 0.005mm |
| Repeat positioning accuracy | ≦± 0.005mm |
To ensure the normal use of laser cutting machine, it is necessary to carry out daily maintenance and maintenance of the equipment; regularly to the laser heat dissipation system reasonable dust; regularly to the X axis, Y axis of the limit switch is sensitive.
Daily maintenance and maintenance
1. Check the operation of the laser carefully before turn on daily, check the equipment button indicator lamp, stop the ammonium button key switch is not normal.
2. check the circulating water level of water cooler water tank, if not
added in time.
3. Check protective lens for damage before daily cutting.
4. Clean up the dust and debris inside the worktable after each shift is completed.
5. After one year of using , the machine tool and worktable should be adjusted regularly to ensure the cutting accuracy of the machine tool
If the equipment is not in use for a long time, please apply butter to the moving parts and rust-prone parts of the machine tool to prevent rust.
Product Tags:
|
|
Metal 2.0mm Thickness CNC Fiber Laser Cutting Machine Ultra Hard 380V Images
|
